Loading ...
Loading ...
Loading ...
6
LED indicator Status
Off • No power
• LED indicator is turned off
*1
Yellow‚ lit Not registered to your wireless router (usually for initial setup) or signal level
is good
*2
Green‚ blinking quickly Camera is searching for your wireless router
Green‚ lit Registration successfully completed
*3
or signal level is strong
*2
Red‚ lit Registration failed
*3
‚ signal level is weak
*2
Blue‚ lit Registration to your wireless router successfully completed or camera is on
*1
Yellow‚ blinking slowly Initial setup is being performed using WPS on your router
Green‚ blinking slowly Registration mode or updating
Red‚ blinking • Camera is out of range of your wireless router
*2
• LED lights are abnormally hot
• Wireless LAN connection failed
White‚ lit Privacy mode is on
*1
Red‚ blinking slowly • Streaming data
*1
or detecting motion
*1
• Accessing microSD card (when privacy mode is off)
White‚ blinking slowly Accessing microSD card (when privacy mode is on)
Green‚ blinking every 1.5 seconds Batteries for power backup are in use
*1 You can congure the camera so that its LED indicator does not light during normal operation. For more
information‚ access the User’s Guide (page 3)�
*2 The signal level (strong‚ good‚ weak‚ out of range) is shown for 3 seconds after pressing
SETUP
button�
*3 Lights for 3 seconds after registration is successfully completed or failed�
HNC850_ITG_(en-en)_0208_ver.070.pdf 6 2019/02/08 17:02:23
Loading ...
Loading ...
Loading ...