Loading ...
Loading ...
Loading ...
541
Continued
Handling the Unexpected
Power System Won’t Start
Checking the Procedure
When the READY indicator does not come on and the Ready To Drive message
does not appear on the driver information interface, check the following items and
take appropriate action.
Checklist Condition What to Do
Check if the related
indicator or driver
information interface
messages come on.
The Remove Charger Connector message appears Removing a charge connector. Set the power
mode to ACCESSORY, then to ON.
The Low Battery Charge. Power Reduced. message appears Charge the High Voltage battery.
2 Charging P. 460
The Temperature Is Too Cold For Vehicle To Operate
message appears.
2 Driver Information Interface Warning and
Information Messages P. 105
The To Start, Hold Remote Near Start Button message
appears.
uMake sure the smart entry remote is in its operating range.
2 POWER Button Operating Range P. 160
2 If the Smart Entry Remote Battery is Weak
P. 543
The POWER SYSTEM indicator comes on. Have your vehicle checked by a dealer.
The transmission system indicator blinks and Transmission
Problem Apply Parking Brake When Parked message
appears.
The power system can be activated as a
temporary measure.
2 If the Transmission System Indicator Blinks
along with the Warning Message P. 558
Check the brightness
of the interior lights.
The interior lights are dim or do not come on at all. Have the 12-volt battery checked by a dealer.
The interior lights come on normally. Check all fuses, or have your vehicle checked by
a dealer.
2 Inspecting and Changing Fuses P. 566
1Checking the Procedure
If you must start the vehicle immediately, use an
assisting vehicle or booster battery to jump start it.
2 If the 12-Volt Battery Is Dead P. 545
21 CLARITY PHEV CSS-31TRW6300.book 541 ページ ２０２０年５月１９日 火曜日 午前１０時４６分
Loading ...
Loading ...
Loading ...