Loading ...
Loading ...
Loading ...
20
Installation Instructions
ELECTRICAL CONNECTIONS
ELECTRICAL REQUIREMENTS
CAUTION: For personal safety, do not
use an extension cord with this appli-
ance. Remove house fuse or open cir-
cuit breaker before beginning installa-
tion.
We recommend you have the electrical wiring and
hookup of your range connected by a qualified electri-
cian. After installation, have the electrician show you
where your main range disconnect is located.
Check with your local utilities for electrical codes which
apply in your area. Failure to wire your oven according
to governing codes could result in a hazardous condi-
tion. If there are no local codes, your range must be
wired and fused to meet the requirements of the Cana-
dian Electrical Code, Part 1 Latest Edition.
This appliance must be supplied with the proper volt-
age and frequency, and connected to an individual
properly grounded branch circuit, protected by a cir-
cuit breaker or fuse having an amperage as specified
on the rating plate. The rating plate is located under
the cooktop, underneath control panel or in the front
frame. (See below pictures).
Effective January 1, 1996, the National Electrical Code
requires that new construction (not existing) utilize a 4-
conductor connection to an electric range.
When installing an electric range in new construction,
follow Steps 3 and 5 for 4-wire connection.
You must use a 3-wire, single-phase A.C. 208Y/120 Volt
or 240/120 Volt, 60 hertz electrical system. If you con-
nect to aluminum wiring, properly installed connectors
approved for use with aluminum wiring must be used.
If the electrical service provided does not meet the
above specifications, have a licensed electrician install
an approved outlet.
NOTE: Use of automatic, wireless, or wired external
switches that shut off power to the appliance, are not
recommended for this product.
ELECTRICAL REQUIREMENTS
WARNING: For personal safety, do not
use an extension cord with this appli-
ance. Remove house fuse or open cir-
cuit breaker before beginning installa-
tion.
This appliance must be supplied with the proper volt-
age and frequency, and connected to an individual
properly grounded branch circuit, protected by a cir-
cuit breaker or fuse having amperage as specified on
the rating plate. The rating plate is located above the
storage drawer on the oven frame.
We recommend you have the electrical wiring and
hookup of your range connected by a qualified electri-
cian. After installation, have the electrician show you
where your main range disconnect is located.
Check with your local utilities for electrical codes which
apply in your area. Failure to wire your oven according
to governing codes could result in a hazardous condi-
tion. If there are no local codes, your range must be
wired and fused to meet the requirements of the Na-
tional Electrical Code, ANSI/ NFPA No. 70- Latest Edition.
You can get a copy by writing:
National Fire Protection Association
Batterymarch Park
Quincy, MA 02269
Loading ...
Loading ...
Loading ...