Loading ...
Loading ...
Loading ...
9
ENGLISH
1. Open the battery cover.
• Slide back and remove the battery cover
in the direction of the arrow.
2. Load batteries.
• Load two Size AA batteries included
observing the correct polarities.
3. Close the battery cover.
• Replace the battery cover in the direction
of the arrow and snap it back into place.
Use the remote control within about 5 m from front of the unit’s
remote-control sensor and within 30 degrees on both sides.
COMPONENT NAMES (continued)
Remote control
POWER button
INPUT SELECT buttons
MENU button
OK button
SOUND MODE button
PROGRAM SELECT buttons
(TV)
TV/TEXT button
(TV)
SWIVEL button
FUNCTION SELECT button
RECALL button
DVD CONTROL buttons
FREEZE/RETURN button
SELECT/ADJUST button
PICTURE MODE button
CH I/CH II button (TV)
CHANNEL UP/DOWN button (TV)
VOLUME UP/DOWN button
MULTI MODE button
MULTI PICTURE button
MUTE button
• Do not use new and old batteries together. The batteries could
explode or leak, resulting in fires, physical injury, or stains.
• When loading batteries, observe their correct polarities as
marked on the product. If loaded in the wrong direction, the
batteries could explode or leak, resulting in fires, physical
injury, or stains.
Loading Batteries
CAUTION
ATTENTION
• Do not drop or impact the remote control.
• Do not splash the remote control with water or put it on a wet
object to avoid possible failures.
• Before leaving the remote control out of use for an extended
period of time, remove the batteries from it.
• If the remote control begins to lack responsiveness, replace the
batteries.
• Strong light such as direct sunlight impinging on the
photoreceptor of the remote control can cause operational
failure. Position this unit to avoid direct contact with such light.
Handling the Remote Control
With in 30 degreesWith in 30 degrees
About 5m
About 3m About 3m
Loading ...
Loading ...
Loading ...