Loading ...
Loading ...
Loading ...
Using the Magic Bullet is as
easy as 1, 2, 3:
1 Load the ingredients into the
Tall Cup, Short Cup or Party Mug.
2 Twist on the Cross Blade
until the blade and cup have a
tight seal.
3 Line up the tabs on the cup
and with the tabs on the Power
Base. Press the cup down onto
the base to turn on the machine.
HERE’S HOW IT WORKS:
The Magic Bullet will blend for
as long as you press the cup
down onto the Power Base. To
stop blending, simply release
pressure on the cup.
USING THE
MAGIC BULLET
“LOCK ON” MODE:
For hands-free operation, press
down and gently turn the cup
clockwise until the tabs lock
under the lip of the Power
Base. Once you are in Lock
On Mode, the motor will run
continually. To turn it off, simply
twist the cup back counter-
clockwise and release the cup.
CAUTION:
Before using the cross blade,
check the gasket to make sure it is
not damaged and it is completely
seated in the cross blade unit
before each use.
Never put your hands or utensils
near the moving cross blades and
never use your hands or utensils to
press the activator buttons down
while the Power Base is plugged in.
IF THE CROSS BLADE STOPS
SPINNING WHILE IN LOCK ON
MODE, IMMEDIATELY UNPLUG
THE MAGIC BULLET. Hard
ingredients like carrots or celery
can get stuck in the cross blade
and stop it from turning. If this
happens, UNPLUG THE MAGIC
BULLET RIGHT AWAY. Remove the
cross blade/cup assembly from the
Power Base, and give ingredients
a good shake to unblock the
cross blade. If the cross blade still
remains obstructed, twist the cross
blade attachment off of the cup
and carefully spin the metal blades
by hand (they are sharp) to release
the blockage. Reattach the cross
blade to the cup, plug in the Magic
Bullet and try again. It should spin
normally.
NEVER RUN THE MAGIC BULLET
FOR MORE THAN ONE MINUTE
AT A TIME, AS IT CAN CAUSE
PERMANENT DAMAGE TO THE
MOTOR. If the motor stops working,
unplug the Power Base and let it cool
for a few hours before attempting
to use it again. Your Magic Bullet
has an internal thermal breaker that
shuts the unit off when it overheats.
Letting the thermal breaker cool down
should allow it to reset.
1514
CAPBRAN HOLDINGS, LLC
Loading ...
Loading ...
Loading ...