Loading ...
Loading ...
Loading ...
EASY
CLEAN-UP
CLEANING THE
MAGIC BULLET
The Magic Bullet doesn’t only
quickly prepare food, it also
saves a huge amount of cleanup
time! This little machine lets you
make delicious, piping hot pasta
sauces, salsa, sandwich fillings,
fresh soups, and more without
dirtying a single cutting board,
pot, or pan.
Cleaning the pieces themselves
is also a snap. All Magic Bullet
cups and Stay-Fresh lids can be
washed in the top shelf of the
dishwasher, and cross blades
can be quickly hand washed
with soap and water.
CLEANING THE MAGIC
BULLET POWER BASE
The Power Base doesn’t
generally get dirty, but liquids
can leak out of cups and into
the base and activator tabs if
the cross blade isn’t twisted on
tightly enough during blending.
If this happens, UNPLUG THE
POWER BASE (this is very
important), then wipe the inside
and outside of the base with a
damp cloth. Let the machine dry
for a few minutes before using
again.
If leakage isn’t immediately or
thoroughly cleaned, it can dry
in the Power Base, leaving sticky
residue on the activator tabs.
Sticky tabs can get jammed in
lock-on mode during blending,
causing the motor to continue
spinning even after the cup/
cross blade assembly is
removed from the base. If this
happens, immediately unplug
the Power Base. Using a damp
cloth, work the activator buttons
up and down to soften and
remove any sticky substances.
Let the Power Base dry for a few
minutes before blending again.
CAUTION:
Never submerge the power base
in water or place it in dishwasher.
Never put your hands or utensils
near the moving cross blade and
never use your hands or utensils to
press the activator buttons down
while the Power Base is plugged in.
STUBBORN CLEANUP:
If tough-to-clean ingredients like
melted cheese or dried tomato
are caked onto to the sides of
your Magic Bullet cup, fill the cup
with soapy water and heat in the
microwave for one minute. This
should loosen ingredients enough to
be wiped away with a light scrub.
CAUTION:
Always unplug the Magic Bullet
when cleaning or assembling.
Do not put the cross blades in the
dishwasher as the heat from some
dishwashers can cause the gaskets to
deteriorate or come loose.
2322
CAPBRAN HOLDINGS, LLC
Loading ...
Loading ...
Loading ...