Loading ...
Loading ...
IMPORTANT MICROWAVE SAFEGUARDS
The Magic Bullet has gone BPA Free! All of the recipes that require cooking in the Magic
Bullet vessels have been updated to reflect our new BPA free instructions. Because
every microwave is different, we now recommend microwaving foods for a maximum of
2 minutes, then checking the temperature of the food and continue heating only if the
contents of the vessel are not hot enough.
•
Never heat foods for longer than 2 minutes consecutively. Heat for 2 minutes.
Let the food sit for 2 minutes, remove from microwave, open the container and
carefully stir, then heat for 2 minutes again.
• NEVER MICROWAVE UNVENTED, SEALED CONTAINERS AS THEIR CONTENTS MAY
EXPAND WITH HEAT PRESSURE AND EXPLODE, RESULTING IN INJURY OR PROPERTY
DAMAGE. DO NOT USE THE SOLID LID IN THE MICROWAVE, USE ONLY THE VENTED LIDS.
• WARNING: NEVER MICROWAVE CUPS WITH THE BLADE ATTACHED TO THE CUP. THE
METAL IN THE BLADE MAY SPARK, OR FIRE AND MAY RESULT IN INJURY OR DAMAGE
TO PROPERTY.
• After microwaving, always use heat resistant pads to handle Magic Bullet cups. Allow the
ingredients to settle for a moment and then carefully open the lid pointing the container
away from your body as escaping steam and moisture may cause scalding burns.
• Do not use the Party Mug in the microwave.
•
Follow the precautions and recommendations found in your microwave oven instruction
manuals, specifically the overall heating times, but never run microwave longer than 2
minutes consecutively.
•
Do not use excessive amounts of time when heating water or liquids in the microwave,
and do not exceed more than 2 minutes consecutively.
•
Superheated Water – Liquids such as water, coffee, tea or soups are able to be
overheated beyond the boiling point without appearing to be boiling. Visible bubbling
or boiling when the container is removed from the microwave is not always present.
This could result in very hot liquids suddenly boiling over when the container is
disturbed or a spoon or other utensil (such as a Magic Bullet blade) is inserted into
the liquid. To reduce the risk of injury to persons:
– Do not overheat the liquid.
– Stir the liquid both before and halfway through heating it to avoid eruption.
– After heating, allow the container to stand in the microwave for a short time before
removing container.
– Use extreme care when inserting a spoon or other utensils into the container.
– Avoid heating baby food or formula in Magic Bullet cups.
– Don’t defrost frozen beverages in Magic Bullet cups (especially carbonated
beverages). Even if the container is opened, pressure can build up. This can
cause the container to burst, possibly resulting in injury.
– Hot foods and steam can cause burns. Be careful when removing Magic Bullet
cups from the microwave when they contain hot foods and liquids.
– To prevent possible injury, always use protective oven gloves and direct steam
away from hands and face.
•
Do not overcook food. Carefully attend to appliance when Magic Bullet Cups are placed
inside an operating microwave.
•
Some products, such as whole eggs, may explode and should not be heated using the
Magic Bullet cups in the microwave.
CLEANING INSTRUCTIONS
• DO NOT PUT THE CROSS BLADE IN THE DISHWASHER. HANDLE BLADES WITH CARE
AS THEY ARE SHARP! SIMPLY HAND WASH WITH WARM SOAPY WATER. IF NEEDED,
USE A DISHBRUSH TO LOOSEN DEBRIS. FOR FURTHER DISINFECTION, YOU MAY RINSE
THE BLADE USING A 10% SOLUTION OF VINEGAR AND WATER OR LEMON JUICE.
• THE MAGIC BULLET CUPS CAN BE WASHED ON THE TOP RACK OF THE DISHWASHER
USING THE NORMAL (NOT SANITIZE) CYCLE. THE MAGIC BULLET CUPS AND CROSS
BLADE SHOULD NOT BE STERILIZED IN BOILING WATER FOR ANY REASON AS THIS WILL
WARP THE PLASTIC.
• WHEN WASHING THE CROSS BLADE, DO NOT ATTEMPT TO REMOVE THE GASKET RING.
SIMPLY HAND WASH IN WARM SOAPY WATER. ATTEMPTED REMOVAL OF THE GASKET MAY
PERMANENTLY DAMAGE THE BLADE CONFIGURATION AND CAUSE LEAKAGE. IF IN TIME
A GASKET BECOMES LOOSE OR DAMAGED, PLEASE CONTACT CUSTOMER SERVICE FOR A
REPLACEMENT MAGIC BULLET BLADE HOLDER AT: 1-866-446-6352.
For the most part the Power Base doesn’t really get dirty, but if you neglect to twist the
blade on to the cup tightly, liquids can leak out and get into the base and activator buttons.
Here’s how to clean it up.
Step 1: The most important thing is to UNPLUG the Power Base
before cleaning!
Step 2: Make sure the blade is not attached to the Power Base.
Step 3: Use a damp rag to wipe down the inside and outside of the
Power Base.
• NEVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN
THE DISHWASHER.
• Never put your hands or utensils near the moving blade and never use your
hands or utensils to press the activator buttons down while the Power Base is
plugged in.
• Periodically, the Power Base actuator tabs where the cup tabs insert may be
come soiled and sticky. To clean the actuators, first make sure the Power
Base is unplugged. Then, use a rag dampened with warm soapy water and
gently scrub the area, allowing the debris to dissolve completely and be wiped
away. For excessive soilage, you may use a 10% dilution of vinegar and water
to clean the area thoroughly.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
CAPBRAN HOLDINGS, LLC
Loading ...
Loading ...
Loading ...