Loading ...
• AFTER BLENDING INGREDIENTS, REMOVE THE CROSS BLADE ASSEMBLY—ALLOW THE
VESSEL WITH ITS CONTENTS TO SETTLE AND TO RELEASE ANY PRESSURE THAT MAY HAVE
BUILT UP DURING THE EXTRACTION PROCESS. IF YOU WILL NOT CONSUME IT IMMEDIATELY,
USE THE STAY FRESH LID TO CLOSE THE CONTAINER. UNSCREW THE LID AND RELEASE
PRESSURE PERIODICALLY IF STORING LONGER THAN A FEW HOURS TO RELEASE ANY
ADDED PRESSURE THAT MAY HAVE BUILT UP DUE TO FERMENTATION.
• NEVER PERMIT ANY BLENDED MIXTURE TO SIT INSIDE A CUP SEALED WITH A CROSS
BLADE BASE WITHOUT FIRST RELEASING THE PRESSURE.
• DO NOT ALLOW BLENDED CONTENTS TO SIT FOR LONG PERIODS IN A SEALED
CONTAINER. THE SUGARS IN FRUITS AND VEGETABLES CAN FERMENT, CAUSING
PRESSURE TO BUILD UP AND EXPAND IN THE VESSEL WHICH CAN CAUSE INGREDIENTS
TO BURST AND SPRAY OUT WHEN MOVED OR OPENED. UNCSCREW THE LID AND OPEN
THE CUP FOR A FEW MOMENTS TO RELEASE ANY PRESSURE THAT HAS BUILT UP.
• RELEASE PRESSURE BY CAREFULLY UNSCREWING THE LID AND OPENING THE CUP FOR
A FEW MOMENTS.
ELECTRICAL SAFETY
• Do not pull, twist or mistreat the power cord.
• Do not allow the cord to hang over the side of the counter or table.
• Do not allow cord to touch hot surfaces, including stove.
•
Do not operate any appliance with a damaged cord or plug or if the appliance
malfunctions, or is dropped or damaged in any manner. Contact Customer Service for
assistance in obtaining a replacement.
•
This appliance has important markings on the plug blade. The attachment plug or entire
cord set is not suitable for replacement. If damaged, the appliance shall be replaced.
•
This appliance has a polarized plug (one prong is wider than the other). To reduce the risk
of electric shock, this plug will correctly fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not modify the plug in any way.
• DO NOT USE THIS PRODUCT WITH ANY TYPE OF ADAPTOR OR VOLTAGE CONVERTER
DEVICE. THIS UNIT IS MANUFACTURED IN COMPLIANCE WITH U.S. AND CANADIAN
ELECTRICAL STANDARDS AND PLUG TYPES.
•
USE OF ADAPTERS AND CONVERTERS IS CONSIDERED AN UNAUTHORIZED
MODIFICATION OF THE PRODUCT AND AS SUCH VOIDS THE WARRANTY. USE OF THIS
PRODUCT IN LOCATIONS WITH DIFFERENT ELECTRICAL SPECIFICATIONS MAY RESULT
IN DAMAGE TO THE PRODUCT.
•
UNPLUG THE MAGIC BULLET WHEN IT IS NOT IN USE. MAKE SURE THE MACHINE IS
UNPLUGGED BEFORE ASSEMBLING, DISASSEMBLING, ADDING ADDITIONAL PARTS,
AND CLEANING.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
Read all instructions before operating the Magic Bullet. When using electrical
appliances, basic safety precautions should always be followed, including:
GENERAL SAFETY
• Cross blades are sharp. Handle carefully.
• Always use your Magic Bullet on a clean, flat, hard, dry surface, never on cloth or paper
which may block the fan vents and cause overheating.
• Do not immerse the cord, plug or base in water or other liquids.
• Close supervision is necessary when any appliances are used by or near children.
• Do not use Magic Bullet in the rain or in wet conditions.
• Do not use outdoors if exposed to inclement weather elements.
•
Do not use appliance for other than intended use.
• Do not attempt to defeat the cover interlock mechanism.
•
The use of attachments or parts not recommended or sold by the manufacturer may
cause fire, electric shock or injury and void any applicable warranty.
•
Check gasket to make sure it is not damaged, and it is completely seated in the cross
blade unit before each use.
• Avoid contact with moving parts.
•
Keep hands and utensils away from the cross blade while chopping or blending food to
reduce the risk of severe injury to person or damage to the blender/chopper. A scraper
may be used, but only when the blender/food chopper is not running.
•
NEVER KEEP THE CROSS BLADE RUNNING FOR MORE THAN ONE MINUTE AT A
TIME, AS IT CAN CAUSE PERMANENT DAMAGE TO THE MOTOR.
If the motor stops
working, unplug the Power Base and let it cool for a few hours before attempting to use
it again. Your Magic Bullet has an internal thermal breaker that shuts off the unit when it
overheats. Letting the thermal breaker cool down should allow the Power Base to reset.
•
NEVER LEAVE THE MAGIC BULLET UNATTENDED WHILE IT IS IN USE.
• Never run the Magic Bullet without food or liquid contents in any of the cups.
•
To reduce the risk of injury, never place the cross blade on the power base without
attaching a cup or Party Mug to it.
•
Be certain that the cross blade is completely and firmly screwed on to the cups or Party
Mug before operating appliance.
• Always completely assemble the cross blade and cup before placing on Power Base;
never insert or store the cross blade in base unless attached to a cup.
•
NEVER BLEND CARBONATED BEVERAGES! Released gases can cause pressure to build
up and the container to burst, resulting in possible injury.
• NEVER BLEND HOT INGREDIENTS! Always allow ingredients to cool before blending. Heat
and blending can cause vessel to pressurize and expel hot contents, resulting in possible injury.
• Do not fill the cup with ingredients beyond the MAX line. Some head room is needed at the
top to effectively blend using the cyclonic action which creates internal pressure. Overfilling
may result in leakage during use.
CAPBRAN HOLDINGS, LLC
Loading ...
Loading ...
Loading ...