Loading ...
Loading ...
Loading ...
94
uuIndicatorsuMulti-Information Display Warning and Information Messages
*
Instrument Panel
Message Condition Explanation
●
Appears after the driver’s door is opened when the
power mode is in ACCESSORY.
●
Press the ENGINE START/STOP button twice with your
foot off the brake pedal to change the power mode to
VEHICLE OFF (LOCK).
●
Appears when you close the door with the power
mode in ON without the smart entry remote inside
the vehicle.
●
Disappears when you bring the smart entry remote back
inside the vehicle and close the door.
2 Smart Entry Remote Reminder P. 143
●
Appears when the smart entry remote battery
becomes weak.
●
Replace the battery as soon as possible.
2 Replacing the Button Battery P. 547
●
Appears if the smart entry remote battery is too
weak to start the engine or the key is not within
operating range to start the engine. A beeper
sounds six times.
●
Bring the smart entry remote in front of the ENGINE
START/STOP button to be touched with.
2 If the Smart Entry Remote Battery is Weak P. 564
●
Appears three seconds after the To Start Engine:
Brake + Push message appears.
2 Changing the Power Mode P. 141
●
Appears three seconds after you bring the smart
entry remote in front of the ENGINE START/STOP
button when To Start, Hold Remote Near Start
Button appears. To Start Engine: Brake + Push
appears sequentially.
2 Changing the Power Mode P. 141
Models with smart entry system
17 ACCORD 2D GAS (KA KC KL)-31T3L6400.book 94 ページ 2017年1月16日 月曜日 午前10時15分
Loading ...
Loading ...
Loading ...