Loading ...
Loading ...
Loading ...
79
uuIndicatorsu
Continued
Instrument Panel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator Name On/Blinking Explanation Message
*
System
Message
Indicator
*
●
Comes on for a few seconds when you
turn the ignition switch to ON (w
*1
, then
goes off.
●
Comes on along with a beep when a
problem is detected. A system message on
the multi-information display appears at
the same time.
●
While the indicator is on, press the
(information) button to see the
message again.
●
Refer to the Indicators information in
this chapter when a system message
appears on the multi-information
display. Take the appropriate action for
the message.
●
The multi-information display does not
return to the normal screen unless the
warning is canceled, or the
button is pressed.
—
Turn Signal
and Hazard
Warning
Indicators
●
Blinks when you operate the turn signal
lever.
●
Blink along with all turn signals when you
press the hazard warning button.
●
Does not blink or blinks rapidly - A
turn signal light bulb has blown.
Change the bulb immediately.
2 Replacing Light Bulbs P. 532, 531,
533
—
High Beam
Indicator
●
Comes on when the high beam headlights
are on.
— —
Lights On
Indicator
●
Comes on whenever the light switch is on,
or in AUTO when the exterior lights are
on.
●
If you remove the key from the ignition
switch
*1
while the exterior lights are on,
a chime sounds when the driver's door
is opened.
—
* Not available on all models
17 ACCORD 2D GAS (KA KC KL)-31T3L6400.book 79 ページ ２０１７年１月１６日 月曜日 午前１０時１５分
Loading ...
Loading ...
Loading ...