Loading ...
Loading ...
Loading ...
533
uuReplacing Light BulbsuBrake Light, Back-Up Light, Rear Turn Signal Light Bulbs and Rear Side Marker/Taillights
Maintenance
Brake Light, Back-Up Light, Rear Turn Signal Light
Bulbs and Rear Side Marker/Taillights
When replacing, use the following bulbs.
1. Remove the cargo hook by squeezing the
tabs on both sides.
2. Remove the holding clips using a flat-tip
screwdriver, then pull the lining back.
3. Turn the socket counter-clockwise and
remove it.
4. Remove the old bulb and insert a new bulb.
Brake Light: 21 W
Back-Up Light: 16 W
Rear Turn Signal Light: 21 W (Amber)
Rear Side Marker/Taillight: LED
1Brake Light, Back-Up Light, Rear Turn Signal Light Bulbs and
Rear Side Marker/Taillights
Rear side marker/taillights are LED type. Have an
authorized Honda dealer inspect and replace the light
assembly.
When removing the clip, insert a flat-tip screwdriver,
then lift and remove the clip.
Insert the clip with the pin raised, and push until it is
flat.
Clip
Push until the
pin is flat.
Holding Clip
TabsCargo Hook
Bulb
Socket
17 ACCORD 2D GAS (KA KC KL)-31T3L6400.book 533 ページ ２０１７年１月１６日 月曜日 午前１０時１５分
Loading ...
Loading ...
Loading ...