Ownwe's Manual - Page 544

For ACCORD SEDAN 2017.

Loading ...
Loading ...
Loading ...
542
uuChecking and Maintaining TiresuWear Indicators
Maintenance
Wear Indicators
The groove where the wear indicator is
located is 1/16 inch (1.6 mm) shallower than
elsewhere on the tire. If the tread has worn so
that the indicator is exposed, replace the tire.
Worn out tires have poor traction on wet
roads.
Tire Service Life
The life of your tires is dependent on many factors, including driving habits, road
conditions, vehicle loading, inflation pressure, maintenance history, speed, and
environmental conditions (even when the tires are not in use).
In addition to regular inspections and inflation pressure maintenance, it is
recommended that you have annual inspections performed once the tires reach five
years old. All tires, including the spare, should be removed from service after 10
years from the date of manufacture, regardless of their condition or state of wear.
1Checking Tires
High speed driving
We recommend that you do not drive faster than the
posted speed limits and conditions allow. If you drive
at sustained high speeds (over 99 mph or 160 km/h),
adjust the cold tire pressures as shown below to
avoid excessive heat build up and sudden tire failure.
*1: Except Canadian models
Tire Size 235/45R18 94V
Pressure Front: 35 psi (240 kPa, 2.4 kgf/cm
2
)
Rear: 35 psi (240 kPa, 2.4 kgf/cm
2
)
Tire Size 235/40R19 96V
Pressure Front: 38 psi (260 kPa, 2.6 kgf/cm
2
)
Rear: 35 psi (240 kPa, 2.4 kgf/cm
2
)
Models with 235/45R18 tires
*1
Models with 235/40R19 tires
Models with 235/45R18 tires
*1
Models with 235/40R19 tires
Example of a Wear
Indicator mark
17 ACCORD 2D GAS (KA KC KL)-31T3L6400.book 542 ージ 017年1月16 月曜日 午前10時15
Loading ...
Loading ...
Loading ...