Loading ...
Loading ...
Loading ...
With automatic tailgate operation
Opening
Adjusting the opening height
You can set how far the tailgate should
open.
When adjusting the opening height, ensure
that there is a clearance of at least
4 in/10 cm above the tailgate.
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Doors/Key"
4. "Tailgate"
5. Monitor the tailgate and set the desired
opening height.
From the outside
– Without Comfort Access: unlock vehicle.
With Comfort Access: unlock the vehi-
cle or have the remote control with you.
Press the button on tailgate's exterior.
– Press and hold button on the re-
mote control for approx. 1 sec-
ond.
Depending on the setting, the doors may
also be unlocked. Unlocking with the re-
mote control, refer to page 78.
If the vehicle is stationary, the tailgate
opens automatically to the adjusted opening
height.
From the inside
With Steptronic transmission:
Pull button in the storage compart-
ment of the driver's door upward.
If the vehicle is locked, selector lever posi-
tion P must be engaged first.
With manual transmission:
With the vehicle stationary, pull the
button in the storage compartment of the
driver's door upwards twice in quick suc-
cession.
If the vehicle is stationary, the tailgate
opens automatically to the adjusted opening
height.
Interruption of the opening procedure
The opening procedure is interrupted in the
following situations:
– When the vehicle starts moving.
– By pressing the button on the outside of
the tailgate. Pressing again closes the
tailgate.
– By pressing the button on the inside of
the tailgate. Pressing again closes the
tailgate.
– By pressing the button on the remote
control. Pressing again continues the
opening motion.
– By pressing or pulling the button in the
storage compartment of the driver's
door. Pulling again continues the open-
ing motion.
Closing
From the outside
Press the button on tailgate's exterior.
Seite 87
Opening and closing CONTROLS
87
Online Edition for Part no. 01402723862 - VI/18
Loading ...
Loading ...
Loading ...