Loading ...
Loading ...
Loading ...
Switching on/off manually
Press button briefly:
– The menu for the intelligent
safety system is displayed. The
systems are individually
switched off according to their
respective settings.
– LED lights up orange or goes out respec-
tive to their individual settings.
Adjust as needed. The individual settings
are stored for the driver profile currently in
use.
Press button again:
– All Intelligent Safety systems
are switched on.
– The LED lights up green.
Hold down button:
– All Intelligent Safety systems
are switched off.
– The LED goes out.
Warning with braking function
Display
If a collision with a person detected in this
way is imminent, a warning symbol appears
on the instrument cluster and in the Head-
up Display.
The red symbol is displayed and a
signal sounds.
Intervene immediately by braking or
make an evasive maneuver.
Braking intervention
The warning prompts the driver to react.
During a warning, the maximum braking
force is used. Prerequisite for the brake
booster is sufficiently quick and sufficiently
hard stepping on the brake pedal. If there is
a risk of collision, the system may assist
with braking.When the vehicle is traveling
at a low speed, the vehicle may come to a
complete stop.
The braking intervention occurs only if ve-
hicle stability has not been restricted,
for instance by deactivating the DSC Dy-
namic Stability Control.
The driver may cancel the braking interven-
tion by stepping on the accelerator pedal or
by actively moving the steering wheel.
Object detection can be restricted. Follow
the limitations of the detection range and
functional restrictions.
System limits
Safety information
WARNING
The system can react not at all, too late, in-
correctly, or without justification due to
the system limits. There is a risk of acci-
dents or risk of damage to property. Follow
the information regarding the system lim-
its and actively intervene if needed.
Detection range
The detection potential of the camera is lim-
ited.
Thus, a warning might not be issued or be
issued late.
E.g., the following situations may not be de-
tected:
– Partially covered pedestrians.
– Pedestrians that are not detected as
such because of the viewing angle or
contour.
– Pedestrians outside of the detection
range.
Seite 184
CONTROLS Safety
184
Online Edition for Part no. 01402723862 - VI/18
Loading ...
Loading ...
Loading ...