Loading ...
Loading ...
Loading ...
Or:
Press and hold this button.
The indicator light in the instrument
cluster lights up.
To switch distance control back on, press
one of the two buttons again briefly.
After changing over distance control, a
Check Control message is displayed.
Displays in the instrument cluster
Desired speed and stored speed
In addition to the indicator light, the
desired speed is displayed in the Info
Display.
– Display lights up green: system is active,
the display indicates the desired speed.
– Display lights up orange: system is in-
terrupted, the display indicates the
stored speed.
– No display: system is switched off.
If no speed is indicated, it is possible that
the conditions necessary for operation are
not currently fulfilled.
Distance to vehicle ahead of you
Selected distance from the vehicle driving
ahead is briefly displayed in the left hand
portion of the Info Display.
Distance display
Distance 1
Distance 2
Distance display
Distance 3
Distance 4
This value is set automatically af-
ter the system is switched on.
Detected vehicle
Symbol lights up orange:
A vehicle has been detected ahead of
you.
With the Stop&Go function for Step-
tronic transmissions:
Rolling bars: the detected vehicle
has driven away.
ACC does not accelerate. To accelerate, acti-
vate ACC as follows:
– By briefly pressing the accelerator
pedal.
– By pressing the RES CNCL button.
– By pressing the or button.
Indicator/warning lights
Symbol flashes orange:
The conditions are not adequate for
the system to work.
The system was deactivated but applies the
brakes until you actively resume control by
pressing on the brake pedal or accelerator
pedal.
Symbol flashes red and a signal
sounds:
Brake and make an evasive maneu-
ver, if necessary.
The system has been interrupted or
distance control is temporarily sup-
pressed because the accelerator
Seite 195
Driving comfort CONTROLS
195
Online Edition for Part no. 01402723862 - VI/18
Loading ...
Loading ...
Loading ...