Loading ...
Loading ...
Loading ...
82
uuIndicatorsu
Instrument Panel
Indicator Name On/Blinking Explanation Message
System
Message
Indicator
●
Comes on for a few seconds when you set
the power mode to ON, then goes off.
●
Comes on along with a beep when a
problem is detected. A system message on
the multi-information display appears at
the same time.
●
While the indicator is on, press the
(information) button to see the
message again.
●
Refer to the Indicators information in
this chapter when a system message
appears on the multi-information
display. Take the appropriate action for
the message.
●
The multi-information display does not return
to the normal screen unless the warning is
canceled, or the button is pressed.
—
Turn Signal
and Hazard
Warning
Indicators
●
The turn signal indicators blink when you
operate the turn signal lever.
●
If you press the hazard warning button,
both indicators and all turn signals blink at
the same time.
●
Does not blink or blinks rapidly - A
turn signal light bulb has blown.
Change the bulb immediately.
2 Replacing Light Bulbs P. 390, 392
—
High Beam
Indicator
●
Comes on when the high beam headlights
are on.
— —
Lights On
Indicator
●
Comes on whenever the light switch is on,
when the exterior lights are on.
●
If you set the power mode to VEHICLE
OFF (LOCK) while the exterior lights are
on, a chime sounds when the driver's
door is opened.
—
13 ACCORD PHEV-31T3V6000.book 82 ページ ２０１５年９月９日 水曜日 午後３時１３分
Loading ...
Loading ...
Loading ...