Loading ...
Loading ...
Loading ...
424
Handling the Unexpected
Power System Won’t Start
Checking the Procedure
When the READY indicator does not come on and the Ready to Drive message
does not appear on the multi-information display, check the following items and
take appropriate action.
Checklist Condition What to Do
Check if the related
indicator or multi-
information display
message come on.
The Remove Charger Connector message appears Removing a charge connector. Set the power
mode to ACCESSORY, then to ON.
The Temperature is Too Cold For Vehicle To Operate
message appears
2 Multi-Information Display Warning and
Information Messages P. 87
The To Start, Hold Remote Near Start Button message
appears
uMake sure the smart entry remote is in its operating range.
2 POWER Button Operating Range P. 138
2 If the Smart Entry Remote Battery is Weak
P. 425
The POWER SYSTEM indicator comes on Have the vehicle checked by an authorized
Honda Accord Plug-In dealer.
Check the brightness
of the interior lights.
The interior lights are dim or do not come on at all Have the 12 volt battery checked by an
authorized Honda Accord Plug-In dealer.
The interior lights come on normally Check all fuses, or have the vehicle checked by
an authorized Honda Accord Plug-In dealer.
2 Inspecting and Changing Fuses P. 439
Check the select lever
position.
The shift lever is not in (P or (N Move the shift lever to the (P position.
1Checking the Procedure
If you must start the vehicle immediately, use an
assisting vehicle to jump start it.
2 Jump Starting P. 427
13 ACCORD PHEV-31T3V6000.book 424 ページ ２０１５年９月９日 水曜日 午後３時１３分
Loading ...
Loading ...
Loading ...