Loading ...
Loading ...
Loading ...
36
5 Maintenance
15 minutes after milk preparation, the milk system is automatically
rinsed. Therefore always place a receptacle under the dual spout
after preparing milk.
To ensure that the milk system in the dual spout always works prop-
erly, you must clean it daily when you have been preparing milk.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E JURA milk system cleaner is available from specialised dealers.
E To clean the milk system, use the container supplied.
Precondition:The start screen is displayed.
T Press the Rotary Switch.
T Touch
‘Clean the milk system’.
T Touch
‘Next’.
‘Cleaning agent for milk system’ / ‘Connect the milk tube’
T Remove the milk pipe from the milk container or milk cooler.
T Add milk system cleaner to the front part of the container
up to the bottom mark (indicated by 6).
T Then fill with water up to the upper mark.
T Place the container under the dual spout and connect the
milk pipe with the container.
E To connect the milk pipe to the container correctly, the pipe
must be fitted with a connector.
T Touch
‘Start’.
‘Milk system is being cleaned’, the dual spout and the milk
pipe are cleaned.
The operation is interrupted,
‘Water for cleaning milk sys-
tem’
/ ‘Connect the milk tube’
T Rinse the container thoroughly and fill the front part with
fresh water up to the upper mark.
Automatic milk system
rinsing
Cleaning the milk system
CAUTION
6
Loading ...
Loading ...
Loading ...