Loading ...
Loading ...
Loading ...
33
4 Permanent settings in programming mode
T Now move your finger across the controller and set it to ‘0’.
T Touch
‘Save’.
‘Smart mode’
T Touch ‘Back’ the number of times needed to display the start
screen again.
Define whether the product names or just the product images
should be shown on the start screen.
Example:Proceed as follows to activate the product names on the
start screen.
Precondition:The start screen is displayed.
T Press the Rotary Switch.
T Touch the ‘Machine setting’
f.
‘Switch off after’
T Turn the Rotary Switch until ‘Product name’ is displayed.
T Touch
‘Product name’.
‘Product name’
T Now move your finger across the controller and set it to ‘1’.
T Touch
‘Save’.
‘Product name’
T Touch ‘Back’ the number of times needed to display the start
screen again.
In programming mode you can view the following information:
U
‘Product counter’: Number of prepared speciality coffees and
hot water
U
‘Maintenance counter’: Number of maintenance programmes
performed (cleaning, descaling etc.)
U
‘Version’: Software version
Example:Proceed as follows to view the number of speciality cof-
fees prepared.
Precondition:The start screen is displayed.
T Press the Rotary Switch.
T Touch the ‘Machine setting’
f.
‘Switch off after’
T Turn the Rotary Switch until ‘Product counter’ is displayed.
Displaying product
names
Query counter readings
and version
Loading ...
Loading ...
Loading ...