Loading ...
Loading ...
Loading ...
ENGLISH
20
>
Press the ESC button to exit the programming function.
The machine automatically exits the programming mode if no button is pressed for 3 minutes.
9. Troubleshooting
This chapter summarises the most common issues that might concern your machine.
If the following information is insufcient to solve the problem, please refer to the
FAQ page of the www.gaggia.com website, or contact the Gaggia hotline. Contacts are
included in the warranty booklet supplied separately or can be found at www.gaggia.com.
The machine is colour coded for easier interpretation of the display signals. The colour
codeofthesymbolsisbasedonthetrafclightconcept.
9.1 Alarm signals summary: red display
Display Description Action
Put back the drip tray and coffee
grounds drawer; close the service
door.
Read the “7.1.1 Machine cleaning when needed”
chapter to restore the components to their proper
places.
Coffee bean hopper empty.
Follow the relevant instructions in the “4.3 Coffee
bean hopper lling” chapter.
Brew group not inserted.
Close the service door. Turn the machine off and
back on again. The brew group automatically returns
to the starting position.
Coffee grounds drawer full.
Empty the coffee grounds drawer as described in
the “7.1.1 Machine cleaning when needed” chapter.
Water tank empty.
Follow the relevant instructions in the “4.2 Water
tank lling” chapter.
A beverage has been selected with
the coffee been hopper lid open.
Close the coffee bean hopper lid on the machine
within 30 seconds to complete brewing.
(Only for 120V machines)
XX
The machine is out of service.
Follow the relevant instructions in the “9.3 The
machine is out of service” chapter.
9.2 Warnings signals summary
Display Description Action
The machine is ready to brew
products: coffee bean hopper empty.
Follow the relevant instructions in the “4.3 Coffee
bean hopper lling” chapter.
The machine is ready to brew
products: replace the INTENZA+
waterlter.
Follow the relevant instructions in the “10.2.2
INTENZA+ replacement” chapter.
The machine is waiting to start the
water circuit priming process.
Follow the relevant instructions in the “5.2.1 Water
circuit priming” chapter.
10
CLEAN
The milk carafe ducts should be
cleaned.
Follow the relevant instructions in the “7.4.1 Quick
milk carafe ducts rinse cycle” chapter.
START
CALC
CLEAN
The machine must be descaled.
Follow the relevant instructions in the “7.5 Descaling
cycle” chapter.
The machine is heating up. Wait.
Loading ...
Loading ...
Loading ...