Loading ...
Loading ...
Loading ...
• Remove the plug (11) – if supplied with your appliance –
from the hole in the top left of the refrigerator door and
press firmly into the hole on the top right of the door
• Remove the cap, screw and washer (12) from the far
left of the centre frame and re-insert in the far right of the
centre frame.
• Use a at bladed screw driver to remove the 2 plastic
screws (13) from the left side of the centre cabinet. Re-
insert them into the holes to which the centre hinge (10)
was previously fitted.
• If possible, get help to secure the fridge as it will need
to be tilted back in order to remove the two screws (14)
that secure the inge (15) to the bottom right side of the
appliance.
• Unscrew the left front foot (16) and transfer it to the
corresponding hole under the right bottom corner.
• Unscrew the foot (17) and remove it from the bottom
hinge (15) then screw the foot (17) in from the other side
of the hinge (15).
• Unscrew the hinge pin (18) from the bottom hinge (15)
then secure it on the reverse side of the bottom hinge
(15). Make sure all washers are reinstalled in their
original order.
• With the refrigerator door in the closed position, secure
the bottom hinge (15) – previously removed from the
other side – onto the bottom left corner, tightening the 2
screws (14) firmly.
• With the bottom pin of the middle hinge (10) lodged in
the hole on the top left of the refrigerator compartment
door, secure the reversed middle hinge (10) and the
reversed gasket to the left of mid cabinet using the 2
hinge screws (9).
• Put the plastic washer on the middle hinge (10) top pin,
then mount the freezer door on the middle hinge (10)
top pin.
• With the reassembled top hinge pin (7) located in the
hole in the top inside left corner of the freezer door, fix
the hinge (6) to the top left corner of the appliance using
the 3 top hinge screws (5).
• Replace the top cover (1) using screws (3) and (4).
Replace the rectangular hole plugs.
1
2
2
3
3
8
5
7
6
10
11
16
15
14
17
18
9
12
13
4
4
Left sided hinging assembly
Loading ...
Loading ...
Loading ...