Loading ...
Loading ...
Loading ...
12
11. Touch and hold START/PAUSE
button to begin wash cycle
Press and hold the START/PAUSE button to start the wash
cycle. When the cycle has nished, the end of cycle signal
will sound (if set). Promptly remove items when cycle is
done to avoid odor, reduce wrinkling, and rusting of metal
hooks, zippers, and snaps.
Unlocking the lid to add items
If you need to open the lid to add 1 or 2 missed items:
Touch START/PAUSE button to pause washer; the lid will
unlock once the washer movement has stopped. This
may take several minutes if the load was spinning at a
high speed. Then close lid and press and hold the START/
PAUSE button again to restart the cycle.
IMPORTANT: If lid is left open for more than 10 minutes
the water will pump out and F8E6 error code will appear
on the display.
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as Extra Rinse. These may be turned off,
if desired.
NOTE: Not all options are available with all cycles. Touch
control panel to select any other options.
10. Select cycle options
Loading ...
Loading ...
Loading ...