Loading ...
Loading ...
Loading ...
Before using for the first time
27
Signing on the remote control
A WiFi connection cannot be used at
the same time as the remote control.
To use the remote control, you must
sign out of the WiFi connection (see
“Signing out of WiFi”).
To sign on the remote control, press
the run-on control on the
ventilation hood for approx.
10seconds until1 lights up.
Then press in turn:
– the control,
– then the control,
– then the lighting control,
– then the control to sign on.
2 will light up constantly, 3 will flash on
and off.
After a few seconds, 2 and 3 will light
up constantly, B will flash on and off.
Press theand buttons on the
remote control at the same time for
about 5seconds until the LED on the
remote control starts flashing.
Then press in turn:
– the lighting control,
– then the control to sign on.
The search for a wireless connection
will start. The remote control LED
flashes steadily.
After approx. 30seconds, the remote
control LED flashes on and off four
times with short intervals between the
flashes. The LED will go out after a little
while.
Wait until B on the ventilation hood has
gone out and 2 and 3 are lit up
constantly. The wireless connection has
now been established.
Confirm the signing on procedure by
pressing the delayed shutdown
control on the ventilation hood.
All the indicator lights will go out.
The remote control can now be used.
If confirmation is not completed within
4minutes, activation will be canceled.
Canceling the signing on procedure
If it is not possible to sign on, the
procedure can be cancelled by
pressing the delayed shutdown
control on the ventilation hood
and on the remote control.
The signing on procedure must then
be repeated. To do this, the
ventilation hood and the remote
control must first be signed off.
Loading ...
Loading ...
Loading ...