Loading ...
Loading ...
Loading ...
Before using for the first time
26
Signing the remote control on/
off
If the connection has been lost between
the remote control and the ventilation
hood, the remote control and the
remote control function on the
ventilation hood must be signed on
again. To do this, the remote control
function on the ventilation hood and the
remote control must first be signed off.
Please bear in mind that disabling the
signal will also disable any
Con@ctivity 2.0 connection and this
will have to be activated again.
Switch the ventilation hood off. The
canopy must be retracted.
Remove the grease filters.
The controls are accessible via the slots
for the grease filters.
Signing off the remote control
Press the delayed shutdown
control on the ventilation hood
for approx. 10seconds until 1 lights
up.
Then press in order:
– the control,
– then the control,
– then the lighting control,
– then the control to sign off.
2 will light up constantly, 3 will flash on
and off.
After a few seconds, 2 and 3 will start
flashing on and off.
Confirm the signing off procedure on
the ventilation hood by pressing the
delayed shutdown control. All the
indicator lights will go out.
Press theand controls on the
remote control at the same time for
about 5seconds until the LED on the
remote control starts flashing.
Then press in turn:
– the lighting control,
– then the control to sign off.
The remote control LED flashes
steadily.
After approx. 10seconds, the remote
control LED flashes on and off twice
with a longer gap between the flashes.
The LED will go out after a short while.
The remote control is signed off.
Loading ...
Loading ...
Loading ...