Loading ...
Loading ...
Loading ...
Before using for the first time
17
Settings with the canopy
retracted
The ventilation hood must be switched
off before activating settings. The
canopy must be retracted. In order to
reach the controls when the canopy is
retracted, please note the following:
Remove the grease filters.
The controls are accessible via the slots
for the grease filters.
Selecting extraction mode or
recirculation mode
The ventilation hood can be operated
with either extraction mode or
recirculation mode. The power of the
blower is adapted to suit the selected
mode of operation. The ventilation
hood is set up at the factory for
recirculation mode. It has to be reset
for extraction mode.
To reset it for extraction mode, the filter
saturation indicator for the charcoal
filter(s) has to be deactivated.
Switch off the blower and the lighting.
Press the control and the filter
saturation indicator at the same
time.
The charcoal filter symbol and one of
the blower power level indicators will
flash.
Press and hold the control until the
B indicator lights up.
Confirm the selection by pressing the
filter saturation indicator.
All the indicator lights will go out.
Extraction mode has now been set.
If the new setting is not confirmed
within 4minutes, the ventilation hood
will revert to the previous setting.
Loading ...
Loading ...
Loading ...