Loading ...
Loading ...
Loading ...
41
Use more of your phone
9.7.5.1 Conferencing between
two internal units and an
external line
1 During the call, press i to put the
external call on hold (the caller can
no longer hear you).
• The display shows the numbers
of available units (base or
handsets).
2 Scroll n to the number of the unit
you wish to establish the
conference call with and press o
Select.
3 Press t on the called handset or
l on the base to answer the
internal call, where both internal
callers can talk.
• Intercom is established.
4 Press Conf. soft key or long press
i on the first unit to start the
three party conference.
• Conference will be displayed
on the screen once the
conference call is established.
9.7.5.2 Conferencing between
one internal unit and two
external lines
1 During a call, press the line key
(Line 1 or Line 2 soft key on the
handset, or [ or ] on the base
station) for a free line to make or
answer a second external call and
put the first external call on hold
(the caller can no longer hear you).
2 When the second call is connected,
press Option soft key, scroll n to
Conference, and press o Select
to initiate the conference call.
• Conference will be displayed on
the screen once the conference
call is established.
3 To disconnect a single caller, press
the corresponding line key (Line 1
or Line 2 soft key on the handset,
or [ or ] on the base station)
to place the caller you wish to keep
speaking to on hold, and then press
h key on the handset or l on
the base to hang up the other caller.
Then press the other line soft key
to take the remaining call off hold
and continue the conversation.
To hang up both lines, press h key on
the handset or l on the base station.
9.8 Locate Handset
This feature enables you to locate a
missing handset if the handset is in range
and contains charged batteries.
1 Press a on the base station.
• All the registered handsets start
to ring.
• Once a handset is found, press
c Silent on a handset to stop
its ringing.
2 Press a again to end the paging.
If there are no key presses within 30
seconds, the handset and base station
will automatically return to idle mode.
Note
Loading ...
Loading ...
Loading ...