Loading ...
Loading ...
Loading ...
^ while holding the adjusting bolts h in
place with a screwdriver, tighten the
nuts c on the appliance doors with a
wrench j.
^ Cover strip k must be completely
hidden in the niche, and must not
protrude.
^ Drill holes l in the door panel and fit
screws m. Make sure the two metal
edges are aligned (Symbol II).
^ Close the appliance door and the
cabinet door.
Adjusting the position of the door
–
Depth adjustment (Z)
^
Loosen screws i at the top of the
appliance door, and screw n on the
mounting bracket at the bottom. By
moving the cabinet door, create a
gap of 1/16" (2 mm) between the
cabinet door and the housing unit.
Installing the appliance
107
Loading ...
Loading ...
Loading ...