Loading ...
Loading ...
Loading ...
Installing the custom door
front
The cabinet door must be at least of
5/8" (16 mm) thick and not exceed 3/4"
(19 mm) thick.
The following gap dimensions must be
maintained:
–
The gap between the cabinet door
and the unit door above must be at
least 1/8" (3 mm).
–
The vertical gap between cabinet
doors should also be about 1/8"
(3 mm). The exact dimension will
vary depending on the radius of the
cabinet door edges.
If fitted in a run of units make sure that
the top edge of the cabinet door is at
the same height as neighboring unit
doors.
The door panel must be installed
correctly and not under tension.
Installing a door front which is
heavier than the maximum permitted
could damage the hinges. This can
cause damage.
Before installing door fronts ensure that
the weight of the door does not exceed
the maximum permitted:
Appliance Max.
weight
of
upper
cabinet
door in
lb (kg)
Max.
weight
of the
lower
cabinet
door in
lb (kg)
KFNS 37692 iDE 44 (20) 26 (12)
When fitting large or divided cabinet
doors an extra fitting kit or set of
fixing brackets should be used.
These are available to order from
Miele.
Installing the appliance
103
Loading ...
Loading ...
Loading ...