Loading ...
Loading ...
Loading ...
En
20
Using the crossfader start function
To use the crossfader start function, set the crossfader assign selector switch of the
channel you want to move to [A] or [B].
1 Set the cue.
Pause at the position from which you want to start playback, then press the [CUE]
button for the corresponding deck.
! Cues can also be set by moving the crossfader to the left edge or the right edge
while pressing the [SHIFT] button in the pause mode.
2 Move the crossfader to the left edge or right edge position.
Set to the edge opposite the side on which the channel you want to use with the
fader start function is set.
3 While pressing the [SHIFT] button, move the crossfader in
the opposite direction from the left edge or right edge.
Playback of the track starts from the set cue point.
! When the crossfader is returned to the original position while pressing the
[SHIFT] button during playback, the track moves instantaneously back to the set
cue point and the pause mode is set (Back Cue).
If no cue is set, playback starts from the beginning of the track.
When the crossfader is moved from the left edge to the right edge (or from the
right edge to the left edge) while pressing the [SHIFT] button when standing by
at a cue, track playback starts from the set cue point.
Adjusting the crossfader’s operating load
The load (resistance) when the crossfader is operated can be adjusted using a
flathead screwdriver.
! You can adjust the play (cut lag) on both edges of the crossfader. For details, see
Adjusting the crossfader cut lag on page 26 .
1 Move the crossfader to the right edge.
2 Insert the flathead screwdriver into the [FEELING ADJUST]
adjustment hole and turn it.
— Turn clockwise: The load decreases (the resistance of fader movement gets
weaker).
— Turn counterclockwise: The load increases (the resistance of fader move-
ment gets stronger).
Using effects
The effect functions of rekordbox dj can be roughly divided into three types: BEAT
FX, SOUND COLOR FX, and RELEASE FX.
The following explains how to operate the three effect function types, BEAT FX,
SOUND COLOR FX, and RELEASE FX.
For details on pad FX for operating these effects using the performance pads, see
Using the pad FX on page 16 .
Using the beat FX function
Beat FX can apply an effect matched to the tempo (BPM) of the track loaded in the
deck.
Beat FX has the two effect units FX1 and FX2, and the deck assigned on each of
these units can be freely set.
Also, beat FX has two FX modes: beat FX single mode and beat FX multi mode.
The beat FX single mode allows you to select one effect and use up to three param-
eters for one effect unit.
The beat FX multi mode allows you to use up to three effects for one effect unit
simultaneously.
Using effects in the beat FX multi mode
The following describes how to assign an effect unit to channel 1.
1 Press the [RELEASE FX] control while pressing the [SHIFT]
button to switch the FX mode of rekordbox dj to the beat FX
multi mode.
The mode switches between the beat FX multi mode and beat FX single mode each
time the buttons are operated.
2 Press the [FX1] button or [FX2] button of channel 1 to select
the effect unit to assign.
3 Press the effect parameter 1 button while pressing the
[SHIFT] button to select the first effect type.
To select the second effect type, press the effect parameter 2 button while pressing
the [SHIFT] button.
To select the third effect type, press the effect parameter 3 button while pressing the
[SHIFT] button.
The currently selected effect type is displayed on the rekordbox dj screen.
4 Press the effect parameter 1 button to turn the first effect
on.
Press the effect parameter 2 button to turn the second effect on.
Press the effect parameter 3 button to turn the third effect on.
The [ON] key for the corresponding effect is highlighted on the rekordbox dj screen.
5 Operate the effect parameter 1 control to adjust the
parameter of the first effect.
Operate the effect parameter 2 control to adjust the parameter of the second effect.
Operate the effect parameter 3 control to adjust the parameter of the third effect.
The balance between the original sound and effect sound can be adjusted.
6 Turn the [RELEASE FX] control while pressing the [SHIFT]
button.
Adjusts the effect time.
7 Press the [BEAT c/d] button.
The beat interval for applying the effect can be adjusted.
Loading ...
Loading ...
Loading ...