Loading ...
Loading ...
Loading ...
HOW TO START
Personal Injury and Product Damage
Hazard
° DO NOT plug in if switch is in ON
position. Personal injury or
damage could result.
• The cord moves rapidly when
rewinding. Keep children away
and provide a clear path when
rewinding the cord to prevent
personal injury.
° DO NOT use outlets above
counters. Damage to items in
surrounding area could occur.
,11 I i ILl iiiiiiii
Cord
Rewind
1. Pull cord out of
canister to desired
length. The cord
will not rewind until
the cord rewind
bar is pushed°
NOTE: To reduce the risk of electric shock,
this vacuum cleaner has a polarized plug,
one blade is wider than the other. This plug
will fit in a polarized outlet only one way, If
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, con-
tact a qualified electrician to install the prop-
er outlet. Do not change the plug in any
way.,
2. Plug the polarized power cord into a 120
Volt outlet located near the floor_
To rewind: Unplug
the cleaner_ Hold
the plug while
rewinding to pre-
vent damage or
injury from the
moving cord. Push
cord rewind bar.
Pile Height
Indicator
Handle
Release
Pile Height Pedal
(Some Models)
3. Lower wand from upright position by
pressing on the handle release pedal.
CAUTION
4. Select a pile height setting by pressing
the small pedal on the rear of the POWER-
MATETMoThe pile height setting shows on
the indicator. See SUGGESTED PILE
HEIGHT SETTINGS,
Attention: Refer to your carpet manufac-
turers cleaning recommendations. Some
more delicate carpets may require that they
be vacuumed with the POWER-MATE TM agi-
tator turned off, to prevent carpet damage°
OFF
5. Select a switch
position on the
handle.
OFF
FLOOR - turns on the canister motor only.
CARPET - turns on both the canister and
the POWER-MATE TM motors.
NOTE - When this switch is in the FLOOR
position, the headlight and dirt sensor
(some models) DO NOT function since no
electricity flows to the POWER-MATE TM
Loading ...
Loading ...
Loading ...