Loading ...
Loading ...
Loading ...
wARNING ........................
Fire andlor Electrical Shock Hazard
Do not operate with a clogged
exhaust filter or without the exhaust
filter or exhaust filter cover installed.
,, ,,,,,,,,,,,,,,,,,,
EXHAUST FILTER
ELECTROSTATIC
The exhaust filter cartridge must be
replaced when dirty_ Replace the filter when
the entire surface area is covered evenly°
The filter CANNOT be washed as it will
lose its dust trapping ability.
NOTE: Use exhaust filter #20-86882o In
Canada, #20-86882C.
1. Pull up on the _"_"_ A
exhaust filter cover to kilt., !.._. 1
remove from the co,_r__._._,,_
motor cover and lay .,f-'-_(_
astde /
Exhaust
2. Slightly push
the exhaust filter
cartridge to the
side, as shown in
the illustration,
and pull up to
remove.
3. Replace the
exhaust filter car-
tridge, carefully
positioning it so
that the side
shown in the
illustration goes
down under the
ribs. Then push
the other side
down until it snaps into place° Place the new
filter into the motor cover with the grey
edge down
4. Replace the
exhaust filter
cover by engag-
ing the two tabs
on the rear and
pushing down in
front until it
snaps closed°
Always follow all safety precautions when
cleaning and servicing the POWER-MATE TM,
WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
16
Loading ...
Loading ...
Loading ...