Loading ...
Loading ...
Loading ...
Projector Web Screen Menu
210
* When the interval is set to 0 seconds, repeated attempts to send mail are made
(as set in [Mail resend times]) without pausing between attempts.
Mail Authentication Settings
From [Mail auth] under [Mail] in the settings screen, you can configure the settings
for authentication of mail that is sent when an error occurs. For the setting
procedure, see “Network Setting” (P91).
Sending a Test Mail
You can send a test mail to the mail address specified in [Mail] under [Mail] in the
settings screen by clicking [Send test mail] at the bottom of the screen.
Mail resend times Enter the number of times to resend
mail when an error occurred within the
range of 0 – 255 using 1-byte numbers.
3
Item Explanation Factory default setting
Mail authentication Select the mail authentication method. If
[OFF] is selected, the other mail
authentication settings cannot be
changed.
OFF
User name Enter the user name to use for mail
authentication in 1-byte alphanumeric
characters and symbols (1 – 63
characters).
<Blank>
Password Enter the password for mail
authentication in 1-byte alphanumeric
characters and symbols (1 – 63
characters).
<Blank>
Confirm password For confirmation, enter the same
password as you entered in [Password].
<Blank>
IPv4 POP3 server IP
address
Enter the POP3 server IP address
(IPv4) in 1-byte numbers.
0.0.0.0
IPv4 POP3 server port
number
Enter the POP3 server port number
(IPv4) in 1-byte numbers (1 – 65535).
110
IPv6 POP3 server IP
address
Enter the POP3 server IP address
(IPv6) in 1-byte numbers.
<Blank>
IPv6 POP3 server port
number
Enter the POP3 server port number
(IPv6) in 1-byte numbers (1 – 65535).
110
POP before SMTP
response time
Enter the SMTP authentication timeout
period after POP3 authentication (unit:
milliseconds) using 1-byte numbers (0 –
9999 milliseconds).
300
Item Explanation Factory default setting
Loading ...
Loading ...
Loading ...