Loading ...
Loading ...
Loading ...
Menu Description
180
Submenu Function
Light source
calibration
Use when there is concern about deterioration of the color and
luminance of the light source due to extended use.
Air filter counter
Shows a counter to remind you when to replace the air filter.
Also shows a counter reset screen.
Power counter
Indicates the total time that the projector has been connected to a power supply.
Firmware
Update the projector firmware.
Check the version indicated before updating the firmware.
Update the projector firmware as follows.
1. Download updated firmware from the Canon website and store it at the root directory on a
USB flash drive.
2. Insert the USB flash drive in the USB port.
3. Follow the instructions shown to complete the update process.
Option Function
OK Execute light source calibration.
Cancel Do not execute light source calibration.
Light source calibration can only be used after about 30 minutes of projection.
• After air filter replacement, reset the air filter counter.
• For details on replacing the air filter, see P217 – P218.
This value is not reset even if [Factory defaults] is executed.
• Firmware versions shown here are for illustration only and differ from actual
versions.
• In some cases, it may not be possible to download updates. For details, contact the
Canon Customer Support Center.
• Firmware updating takes a few minutes. During the update, the LED indicator will
flash in red. Do not turn off the projector while the LED is flashing. After the update,
the projector will automatically turn itself off and enter standby mode.
Loading ...
Loading ...
Loading ...