Loading ...
Loading ...
Loading ...
205
Projector Web Screen Menu
Menu Guide Projector Web Screen Menu
Item Explanation Factory default setting
MAC address Shows the projector’s wired MAC
address.
The projector’s wired
MAC address
IPv4
address
DHCP Select whether to turn the DHCP
function on or off for wired LAN (IPv4).
The following settings cannot be
configured manually when this setting is
[ON], because the IP address is
acquired from the DHCP server.
[IP address]
[Subnet mask]
[Default gateway]
OFF
IP address Enter the projector’s wired LAN (IPv4)
IP address in 1-byte numbers.
192.168.254.254
Subnet
mask
Enter the wired LAN (IPv4) subnet mask
in 1-byte numbers.
255.255.255.0
Default
gateway
Enter the wired LAN (IPv4) default
gateway address in 1-byte numbers.
0.0.0.0
IPv6
address
IPv6 Specify on or off for the IPv6 function of
the wired LAN (IPv6).
Choosing [OFF] will prevent you from
configuring the following settings.
[Autoconfiguration]
[IP address]
[Prefix length]
[Default gateway]
OFF
Autoconfigu-
ration
Select on or off for the auto setting
function of the wired LAN (IPv6).
Choosing [ON] will prevent you from
configuring the following settings.
[IP address]
[Prefix length]
[Default gateway]
ON
IP address Enter the wired LAN (IPv6) address in
1-byte numbers or letters between A
and F.
<Blank>
Prefix length Enter the wired LAN (IPv6) prefix length
in 1-byte numbers.
<Blank>
Default
gateway
Enter the wired LAN (IPv6) default
gateway address in 1-byte numbers or
letters between A and F.
<Blank>
If settings related to TCP/IP were changed, it is necessary to disconnect and reconnect to
the network.
If the network subnet mask was changed, select [Subnet mask] in the above screen and
set the new subnet mask.
Loading ...
Loading ...
Loading ...