Loading ...
Loading ...
Loading ...
II
65
S P E E D L I M I T E R
Disengagement of the maximum speed
Press button
3
located on the end of control
A
.
This action causes the information “
OFF
” to appear in the instrument panel screen.
The memorised speed remains displayed and is not cancelled.
Temporary override of the maximum speed
At any time, it is possible to go above the memorised maximum speed by pressing the accelerator pedal hard down
past the tight spot.
While the memorised speed is being exceeded, the displayed speed fl ashes.
You have only to release the accelerator pedal to return below the maximum speed, to restore the function.
Remark:
If during speed limitation the system cannot keep to the maximum speed (especially on a steep descent or
if you accelerate too hard), the speed fl ashes. Adapt your speed as necessary.
The function will re-engage when your speed has returned below the desired maximum.
To cancel the function
By moving the control from position “
LIMIT
” to position
0
.
Or stop the engine.
The speed that you chose is memorised.
If there is a malfunction, the memorised speed will fl ash and the warning lamp “
OFF
” will come on permanently in the
display. Contact a CITROËN dealer.
If there is a malfunction, the memorised speed will fl ash and the warning lamp “
If there is a malfunction, the memorised speed will fl ash and the warning lamp “
•
•
A fl oor covering that is not recommended by CITROËN may slide underneath the accelerator pedal
and thus prevent the tight spot from being crossed.
It will then be impossible to exceed the chosen speed, except by an action on the controls under
the steering wheel.
The driver still has to remain attentive and in complete control of his vehicle.
Loading ...
Loading ...
Loading ...