Loading ...
Loading ...
Loading ...
A
1
4
3
2
B
II
64
S P E E D L I M I T E R
This driving assistance function enables you to select a maximum speed
that you wish not to exceed.
This must be greater than 30 km/h (approx.
20 mph)
.
Control
A
for the speed limiter is situated below the lighting/signalling con-
trol stalk.
Remark:
The information relating to the speed limiter is displayed in the
instrument panel screen at
B
. This display causes the trip computer infor-
mation to disappear (if it is shown on the instrument panel).
To select the function
Turn control
1
to position “
LIMIT
”.
On selection of the function via control
1
, the last speed
memorised is displayed.
To adjust the maximum speed
When the engine is running, you can adjust the memorised speed by either
short presses or long presses on:
Button
4
to increase the memorised speed.
Button
2
to decrease the memorised speed.
Remark:
Successive presses will modify the cruise speed in steps of 1 km/h
and a continuous press in steps of 5 km/h (3 mph).
Activation of the maximum speed
As the desired maximum speed is displayed, press control
3
to activate the
speed limitation.
•
•
The information “
OFF
” then disappears from the dis-
play.
While the function is active, actioning the accelerator pedal will not permit the
programmed speed to be exceeded, unless you press the pedal hard down past
the tight spot. See “Temporary override of the maximum speed”.
Remark:
The vehicle speed may vary slightly from that memorised.
Loading ...
Loading ...
Loading ...