Loading ...
Loading ...
Loading ...
B
A
1
II
23
A N T I - I N T R U S I O N A L A R M
Your vehicle may be equipped with
an ANTI-INTRUSION ALARM. This
provides:
Exterior perimeter protection by
means of detectors on the vehi-
cle access points (doors, boot,
bonnet) as well as on the elec-
trical supply.
Interior volumetric protection
by means of ultrasonic sensors
(detecting movement inside the
passenger compartment). This
can be deactivated using the
control
1
.
•
•
The installation also has a siren,
and a warning lamp on the con-
trol
1
which is visible from outside
the vehicle, indicating the three
possible statuses of the alarm:
Alarm not active (disarmed),
warning lamp off.
Alarm active (armed), the warn-
ing lamp fl ashes slowly.
Alarm triggered (signalling an
intrusion), the warning lamp
fl ashes rapidly if the alarm is
deactivated by a press on the
control
B
. It stops as soon as
you switch on the ignition.
Note:
If there is a malfunction,
the warning lamp remains perma-
nently on.
•
•
•
Deactivation of the alarm
usng the remote control
The alarm is disarmed when you
unlock the vehicle (with a press on
button
B
on the remote control).
Deactivation of the alarm
with the key
Unlock the doors with the key. The
siren triggers. Enter the vehicle,
insert the key in the ignition and
turn it to the drive position to stop
the siren. Otherwise the siren will
continue for approximately 30 sec-
onds.
Loading ...
Loading ...
Loading ...