Loading ...
Loading ...
Loading ...
40
ENGLISH
Machine actions Causes Solutions
The machine grinds the
co ee beans but no co ee
comes out.
(See note)
There is no water. Fill the water tank and prime the
circuit (see the "Using the Machine
for the First Time" section).
The brew group is dirty. Clean the brew group (see the
"Weekly Cleaning of the Brew
Group" section).
The circuit is not primed. Prime the circuit (see the "Using the
Machine for the First Time" section).
This might occur when the
machine is automatically
adjusting the dose.
Brew a few cups of co ee as
described in the "Saeco Adapting
System" section.
The dispensing spout is dirty. Clean the dispensing spout.
Co ee is too weak.
(See note)
This might occur when the
machine is automatically
adjusting the dose.
Brew a few cups of co ee as
described in the "Saeco Adapting
System" section.
Co ee is brewed slowly.
(See note)
The co ee grind is too ne. Change co ee blend or adjust the
grind as explained in the "Adjusting
the Co ee Grinder" section.
The circuit is not primed. Prime the circuit (see the "Using the
Machine for the First Time" section).
The brew group is dirty. Clean the brew group (see the
"Weekly Cleaning of the Brew
Group" section).
Co ee leaks out of the
dispensing spout.
The dispensing spout is clogged. Clean the dispensing spout and its
holes.
Note:
These problems can be considered normal if the co ee blend has been
changed or if the machine has just been installed. In this case wait until the
machine performs a self-adjusting operation as described in the "Saeco
Adapting System" chapter.
Loading ...
Loading ...
Loading ...