Loading ...
Loading ...
Loading ...
32
ENGLISH
3
Remove the “INTENZA+” water lter (if installed) from the water tank if
it was installed.
4
Remove the water tank and pour the entire content of the Saeco
descaling solution. Fill the water tank with fresh water up to the MAX
level.
5
Place the water tank back into the machine.
7
Press and hold the " " button for 3 seconds. When the button
starts blinking, release it to start the cycle. The "
" button blinks
during the whole descaling cycle.
6
Place a large container (1.5 l) under the steam/hot water wand and the
dispensing spout.
8
The steam/hot water wand (" " button permanently on) and the
dispensing spout ("
" button permanently on) now start dispensing
the descaling solution.
Loading ...
Loading ...
Loading ...