Loading ...
Loading ...
Loading ...
14
ENGLISH
Manual Rinse Cycle
During this process a co ee is brewed and fresh water ows through the
steam/hot water circuit. This takes a few minutes.
1
Place a container under the dispensing spout.
2
Check that the “ ”, “ ”, “ ” and “ ” lights blink permanently.
3
Press the “ ” button. The machine starts dispensing water.
4
When the dispensing has nished, empty the container.
Repeat the operations from step 1 to step 3 twice, then continue with
step 5.
5
Insert a container under the Classic Milk Frother.
6
Press the “ ” button to start dispensing hot water.
7
Dispense water until the no water light " " is permanently on.
8
At the end, ll the water tank again up to the MAX level. Now the
machine is ready for co ee brewing.
Note:
If the machine has not been used for at least two weeks, it will
automatically perform an automatic rinse/self-cleaning cycle. Following
this, you need to initiate a manual rinse cycle as described above.
The automatic rinse/self-cleaning cycle also starts automatically when
the machine has been in stand-by mode or turned o for more than 15
minutes.
At the end of the cycle, it is possible to brew a co ee.
Loading ...
Loading ...
Loading ...