Loading ...
Loading ...
Loading ...
14
7. Press the n button.
Appliance operation begins. You can see the cooking time
counting down in the status bar.
The cooking time has elapsed
A signal sounds. Operation has finished. The status bar shows
00:00:00. You can cancel the signal before it has finished
sounding by pressing the
0 button.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Changing the cooking time
Press the
0 button and turn the rotary selector to change the
cooking time. Press the
0 button.
Opening the oven door during cooking
Operation is suspended. The oven is paused. The
n symbol
flashes on the status bar. Close the door and press the
n
button again. The programme will then continue.
Pausing operation
Press the
n button briefly. The oven is paused. Press the n
button again to continue operation.
Cancelling operation
Press and hold the
n button until the intervention display
appears. You can now change the settings.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
Series of operations
You can use the SeriesOperations function to set up to three
operating modes and then start.
Requirement: you must set a cooking time for each step.
Ovenware
Always use microwave-safe, heat-resistant ovenware.
Setting a series of operations
Note: Always set a cooking time for each step in the series of
operations.
1. Press the 2 button.
The button lights up. "SeriesOperations 1" appears in the
display as the heading.
2. Select and set the desired operating mode.
3. Press the 2 button again in order to select the second
operation in the series.
4. Select and set the desired operating mode.
5. Press the 2 button again in order to select the third
operation in the series.
6. Select and set the desired operating mode.
7. Press the n button.
Appliance operation begins.
Note: The first operation in the series is shown in the display.
The cooking time starts counting down.
The cooking time has elapsed
A signal sounds. The series of operations is finished. You can
stop the audible signal by pressing the
0 button.
Changing the setting
Note: Changes can only be made before operation begins.
1. Press the 2 button until operation 1, 2 or 3 in the series
appears in the displays
2. Set the desired operation in the series with the rotary
selector.
3. Press the n button.
Appliance operation begins.
Cancelling operation
Press and hold the
n button until the intervention display
appears. You can now change the settings.
Time-setting options
You can call up the time-setting options menu by pressing
the
0 button. The following functions are available:
If the oven is switched off:
■ Setting the timer
■ Setting the clock
If the oven is switched on:
■ Setting the timer
■ Setting the cooking time
■ Setting a later end time
Setting the cooking time
If you set the cooking time for your meal, operation stops
automatically once this time has elapsed. The oven stops
heating.
Prerequisite: The type of heating and temperature must be set.
Note: You can only set hours and minutes.
Example in diagram: Top/bottom heating, 180 °C, 45 minutes
&
7RSERWWRP
KHDWLQJ
PLWVFKOLHHQ
6HULHV2SHUDWLRQV
Loading ...
Loading ...
Loading ...