Loading ...
Loading ...
Loading ...
’03 4Runner_U (L/O 0208)
46
2003 4RUNNER from Aug. ’02 Prod. (OM35795U)
WHEN RETURNING THE SEATBACK
If you cannot raise the seatback be-
cause of the locked seat belt, do not
try it forcibly. Release the lock of the
seat belt in the following way. Push in
the lower front edge of the seatback
cushion to slacken the seat belt (1) and
let the seat belt retract a little (2).
CAUTION
When returning seats to their original
position, observe the following pre-
cautions in order to prevent personal
injury in a collision or sudden stop:
D Make sure the seatback is securely
locked by pushing forward and rear-
ward on the top of the seatback.
Failure to do so will prevent the
seat belt from operating properly.
D Make sure the seat belts are not
twisted or caught in the seatback
and are arranged in their proper
position and are ready to use.
D Make sure the bottom cushion is
securely locked by trying to pull up
the edge of the cushion near the
lock release straps.
D Make sure to arrange the buckles of
the seat belts in their proper posi-
tion and be ready to use.
1. Remove the head restraint. Hold the
center of the lever and pull it up.
Then slide the seat further forward
than the front–most lock position.
Flattening seatbacks
(manual seat)
Loading ...
Loading ...
Loading ...