Owner 's Manual - Page 340

For 4RUNNER 2003.

Loading ...
Loading ...
Loading ...
’03 4Runner_U (L/O 0208)
340
2003 4RUNNER from Aug. ’02 Prod. (OM35795U)
COOLING SYSTEM
Total capacity, L (qt., Imp. qt.):
12.3 (13.0, 10.8)
Coolant type:
“Toyota Genuine Long Life Coolant” is
filled in your Toyota vehicle. In order to
avoid technical problems, we strongly
recommend using “Toyota Genuine Long
Life Coolant” or equivalent.
With ethylene–glycol type coolant for a
proper corrosion protection of aluminum
components
Do not use alcohol type antifreeze or
plain water alone.
Please contact your Toyota dealer for
further details.
BATTERY
Open voltage
at 20_C (68_F):
12.6—12.8 V Fully charged
12.2—12.4 V Half charged
11.8—12.0 V Discharged
: Voltage that is checked 20 minutes af-
ter the key is removed with all the
lights turned off
Charging rates:
5 A max.
AUTOMATIC TRANSMISSION
Fluid capacity (drain and refill),
L (qt., Imp. qt.):
Up to 3.0 (3.2, 2.6)
Fluid type:
Toyota Genuine ATF Type T–IV
Change automatic transmission fluid only
as necessary.
Generally, it is necessary to change
automatic transmission fluid only if your
vehicle is driven under one of the Special
Operating Conditions listed in your
“Scheduled Maintenance Guide” or
“Owner’s Manual Supplement”. When
changing the automatic transmission fluid,
use only “Toyota Genuine ATF Type T–IV”
(ATF JWS3309 or NWS6500) to aid in
assuring optimum transaxle performance.
Notice: Using automatic transmission
fluid other thanToyota Genuine ATF
Type T–IV” may cause deterioration in
shift quality, locking up of your trans-
mission accompanied by vibration, and
ultimately damage the automatic trans-
mission of your vehicle.
Please contact your Toyota dealer for fur-
ther details.
TRANSFER
Oil capacity, L (qt., Imp. qt.):
1.4 (1.5, 1.2)
Oil type:
Hypoid gear oil API GL–5
Recommended oil viscosity:
SAE 75W–90
DIFFERENTIAL
Oil capacity, L (qt., Imp. qt.):
Two–wheel drive models
3.05 (3.2, 2.7)
Four–wheel drive models
Front
1.4 (1.5, 1.2)
Rear
3.05 (3.2, 2.7)
Oil type:
Hypoid gear oil API GL–5
Recommended oil viscosity:
Above –18_C (0_F)
SAE 90
Below –18_C (0_F)
SAE 80W or 80W–90
Loading ...
Loading ...
Loading ...