Loading ...
Loading ...
Loading ...
’03 4Runner_U (L/O 0208)
32
2003 4RUNNER from Aug. ’02 Prod. (OM35795U)
SETTING THE SYSTEM
1. Turn the ignition key to the “LOCK”
position and remove it.
The indicator light will start flashing when
the key is removed from the ignition
switch. (See “Engine immobiliser system”
on page 12 in this section for details.)
2. Have all passengers get out of the
vehicle.
3. Close and lock all the side doors, back
door and hood.
The indicator light will remain on when all
the side doors, back door and hood are
closed and locked.
The system will automatically be set after
30 seconds. When the system is set, the
indicator light will start flashing again.
4. After making sure the indicator light
starts flashing, you may leave the ve-
hicle.
Never leave anyone in the vehicle when
you set the system, because unlocking
from the inside will activate the system.
CANCELING THE SYSTEM
The system will cancel under the any of
the following conditions:
D Any of the side doors, back door or
hood is opened.
D Any of the side doors or the back door
is unlocked.
D The key is inserted into the ignition.
D The battery terminal is reconnected.
WHEN THE SYSTEM IS SET
Activating the system
The system will give the alarm under the
following conditions:
D If any of the side doors is unlocked or
opened without the key or wireless re-
mote control transmitter, or if the back
door or hood is forcibly opened.
D If the battery terminal is disconnected
and then reconnected.
D If the ignition is hotwired.
The indicator light will come on when the
system is activated.
If the alarm has been activated and the
key is not in the ignition switch, all the
side doors and back door will re–lock au-
tomatically.
After one minute, the alarm will automati-
cally stop and the indicator light will starts
flashing again.
Reactivating the alarm
Once set, the system automatically resets
the alarm after the alarm stops.
The alarm will activate again under the
same circumstances described in
“Activating the system”.
Stopping the alarm
The alarm will be stopped by the following
these ways:
D Unlock any of the side doors or the
back door with the key or wireless re-
mote control transmitter.
D Turn the ignition key from the “LOCK”
to “ON” position.
These ways cancel the system at the
same time.
Loading ...
Loading ...
Loading ...