Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
39
ArtNo.320-0005 Oven door rubber seal
Fig. 8.11
6.6 To Adjust the Main Oven Door Catch Keep
Open the oven door, and slacken o the locknut at the base of
the keep (Fig. 8.10).
Screw in or out as required until the required t is obtained.
Retighten the locking nut.
6.7 To Replace the Tall Oven Door Outer Panel
Remove the oven door (see 6.2). Lay the door face down on a
suitable surface and remove the two screws from the bottom
edge of the door and the two screws from the inside face of
the door.
Remove the outer door panel. Remove the handle by
unscrewing the two screws. Unscrew the two cross-headed
screws holding the door handle xing bracket to the door
panel. Fit the door handle bracket and door handle to the new
panel.
Fit the panel to the door and reassemble in the reverse order.
6.8 To Replace the Tall oven Magnetic Latch
Remove the control panel (see 1.1). Remove the plinth and
the central vertical cover (5 screws). Prise the retaining clip o
the magnet unit.
Fit the new unit and retaining clip, and reassemble in reverse
order. Check that the door operates correctly.
6.9 To Replace an Oven Door Seal
Open the oven door. The seal has small hooks that hold it in
place by locating into holes in the rear door face on the main
oven and oven front face on tall oven. At the corner, pull the
seal diagonally away from the door centre until the hook is
released (Fig. 8.11). Proceed to the next hook and release it in
a similar way, and so on.
You can use force if the hooks are sti, as the old seal will be
discarded. Carefully lift away the inner back. Reassemble in
reverse order making sure that the four screws and washers
are fully tightened.
ArtNo.320-0004 Oven door keep
ArtNo.320-0003 Oven door latch
B
Fig. 8.9 Fig. 8.10
Loading ...
Loading ...
Loading ...