Loading ...
Loading ...
Loading ...
• 16 •
Light Signals Causes Solutions
Steady on
The machine has reached the right temperature and
is now ready:
- For co ee brewing;
- For hot water dispensing;
- For steam dispensing
Slowly ashing
The machine is warming up to brew coffee and
dispense hot water or steam.
Quickly ashing
Machine is overheating. Co ee may not be brewed. The water must be drained into a container by turning the
selector switch clockwise to the
“ ” position until the green
ready temperature light “ “ stays constantly on. After that, stop
dispensing water.
Slowly ashing
Indicates that the machine is programming the
amount of co ee to brew (see section “Adjusting the
Brewed Co ee”).
Steady on
The machine is brewing a double co ee
Steady on
Low water level. Fill the water tank with fresh drinking water. After re lling the water
tank, the indicator light turns o .
Steady on
The co ee bean hopper is empty. Fill the hopper with co ee beans and start the procedure again.
The dregdrawer is full With the machine turned on, empty the dregdrawer. The dregdrawer
must be emptied after every 8 co ee cycles. If the dregdrawer is
emptied with the machine turned o , or when the indicator light
is not illuminated, the count of co ee cycles is not reset. For this
reason, the indicator light to empty the dregdrawer may illuminate
even when it is not full.
Quickly ashing
The water circuit is empty. Fill the tank with fresh drinking water and prime the water circuit as
described in Section “Using the Machine for the First Time”.
Slowly ashing
Brew group not inserted. Dregdrawer not inserted.
Service door open. Control dial is not in correct position.
Make sure that all components have been correctly inserted and
closed. The blinking red light will now turn o .
+
Blinking in counter-
clockwise direction (cyclical)
The machine is performing the rinse/self-cleaning
cycle
The machine ends the cycle automatically.
You can interrupt the cycle by pressing either co ee button.
Flashing
alternately
A fault has occurred in the brew group. Try again to brew another co ee.
+
Flashing
simultaneously
A fault has occurred in the machine and hot water,
steam or co ee cannot be dispensed.
Turn the machine o . After 30-seconds, turn it back on.
Try this 2 or 3 times.
If the machine does NOT start, contact an authorized service center.
CONTROL PANEL LIGHTS
Loading ...
Loading ...
Loading ...