Loading ...
Loading ...
Loading ...
63
Chapter 4
Flash shooting (Cont.)
: Available, – : Not available : Factory default setting
* The factory default setting and the available settings differ depending on which shooting
mode is selected. See the P/A/S/M column.
● The flash is up, but does not fire.
T Flash does not fire in the following situations:
When shooting a bright subject, in the movie record mode, during
Sequential shooting ( *, *, BKT) (P. 71, 72), during Panorama
shooting (P. 75).
* Red-eye reduction flash and Night scene with red-eye reduction flash are not
available.
● The (flash stand-by) mark blinks.
T The flash is charging. Remove your finger from the shutter button.
When the mark stops blinking, press it again.
● Camera movement warning (Auto, Red-eye reduction, Fill-in)
When (camera shake warning) lights, the shutter speed locks at its
current level. This helps prevent camera movement problems (shutter
speeds that are too slow can cause blur). However, if the zoom
magnification is increased, the camera will increase the locked shutter
speed accordingly.
Zoom position & Shutter speed
W (max.): 1/30 sec., T (max.): 1/250 sec.
TIPS
● The flash may not give you the optimum result in macro mode, especially
with wide-angle shooting. Check the image on the monitor.
● If a conversion lens is attached to the camera, the flash is disabled.
Note
Mode
Flash mode
Auto-flash
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
P/A/S/M
–
–
–
P
ASM
*
–
Loading ...
Loading ...
Loading ...