Loading ...
Loading ...
Loading ...
Ronin-M
User Manual
©
2015 DJI. All Rights Reserved.
29
Please make sure that the remote control is sufciently charged before use. If the low-battery
alert sounds, (refer to Remote Control Power LED Indicator Status below), please recharge
the battery as soon as possible.
Charge the remote control’s battery using the included Micro-USB cable. Using the incorrect
type of charging cable may cause damage.
Turn off the remote control before charging. The power LED indicator will glow solid green
when the battery is fully charged.
When using the remote control, ensure that the antenna is at least 20cm away from any
person.
RemoteControlPowerLEDIndicatorStatus
PowerLEDIndicator Sound Remote Control Status
—
Solid
Green None Functioning normally
—
Solid Red None Charging (remote control is powered off)
—
Solid Yellow None Remote control joystick calibration error, re-calibrate
—
Solid Red
BB---BB---
Low voltage (from 3.5 V-3.53 V). Recharge the remote control
Quick Red ashing
B-B-B
......
Critical low voltage (from 3.45V-3.5V); recharge the remote
control immediately
Slow Green ashing
B--B--B
......
Alert will sound after 15 minutes of inactivity. It will stop
once you start using the remote control.
The remote control will turn off automatically when battery voltage drops below 3.45V.
Charge the battery as soon as possible when the low voltage alert appears or sounds.
Remote Control Battery Level Indicator Status
The battery level indicator displays the current battery level. The following is a description of the
indicators.
:
The LED is in a solid state on
:
The LED is blinking
:
The LED is off
LED1 LED2 LED3 LED4 Current Battery Level
75%~100%
50%~75%
25%~50%
12.5%~25%
0%~12.5%
<0%
Remote Control
Loading ...
Loading ...
Loading ...