Dji RONIN-M User Manual

Loading ...

Ronin-M

User Manual

©

21

More Menu

Briefcase Mode

When Briefcase Mode is switched on, the Ronin-M will be able to seamlessly transform into this

operation mode. With Briefcase Mode turned off, the Ronin-M will allow the camera to roll when the

Ronin-M is tilted past the standard roll axis parameters.

Motor Kill

When the Motor Kill switch is activated, the Ronin-M is still powered on, but the motors will be powered

off. This will allow an adjustment to the gimbal or camera without having to turn it off completely.

Prior to turning off the Motor Kill switch, make sure the gimbal is positioned in the standard operating

position. The Motor Kill switch can also be used if the gimbal operator experiences an issue or needs

to make a quick mechanical adjustment to the gimbal or camera setup.

Roll Control

When the Roll Remote Control is off, the roll axis movement cannot be controlled by a remote control

or the thumb controller.

Silent Mode

Enable Silent Mode to reduce the level of noise that is created by the motors in environments such as a

quiet room. By enabling silent mode, larger and sudden gimbal movements may not be as accurately

stabilized during use in situations such as running when silent mode wouldn’t really be needed. Use

silent mode in quiet conditions where light motor noise may be an issue during audio recording.

Otherwise, it is recommended to leave silent mode off.

Internal Receiver

When the Internal Receiver is off, the gimbal cannot be controlled by a remote control or the thumb

controller, and can only be controlled by other devices via a D-Bus or Lightbridge connection.

Calibrate Center

If the Ronin-M’s pan axis is off-center, you can recalibrate the true center of the Ronin-M using this

switch. Using a remote control, position the pan axis at dead center, then tap the Calibrate Center

button. Tap “Center” again in the pop-up to conrm. Restart the device after recalibrating the center.

Calibrate System

Calibrate System is only used if you notice any kind of drift in any of the axes. To calibrate the system,

place the Ronin-M on the tuning stand and make sure it is completely steady. Ensure a 90 degrees

movement of the camera with the lens pointing straight down is possible without any interference from

video monitor wires during the movement. Then tap the Calibrate System button and let the process

nish before picking up the Ronin-M. Do not move the Ronin-M during calibration. Restart the Ronin-M

after calibration is complete.

Restore Default Settings

This will restore all of the factory default settings that can be congured through the DJI Assistant app.

Device List

To force the DJI Assistant App to nd the Ronin-M, open the "Device List" and the app will search for

Bluetooth devices it recognizes.

DJI Ronin-M Assistant App Tuning

Loading ...

Dji RONIN-M Camera