Loading ...
Loading ...
Loading ...
Mounting Collectors and Cylinder to Frame
Attach the lower mounting rail (provided in the
installation kit) to the frame, using the nuts bolts and
washers provided in the frame kit�
Position the collector(s) on the lower rail
For installations with 2 or 3 collectors, join the
collectors using the barrel unions provided in the
installation kit�
Fasten the collector(s) to the rail using the screws
provided in the installation kit� The screws must go
through the square holes in the rail� Do not fasten
in other locations, as damage to the collector header
pipe may occur�
Position the upper rail above the collector(s) and
fasten with the provided screws�
Position the cylinder above the collector(s) and
fasten both cylinder rails to the frame using the nuts,
bolts and washers provided in the frame kit�
NOTE
The spacing between the cylinder and the collectors can vary� The copper pipe provided in the kit may
need to be shortened to allow for this�
Rinnai 30 CC B OIM
INSTALLATION - ALL SYSTEMS
Loading ...
Loading ...
Loading ...